Cleaning The Drain Pump Filter; Troubleshooting - Scandomestic WAH 1506 W User Manual

Cleaning the Drain Pump Filter

Warning!
Make sure that the machine has
finished the washing cycle and is
empty. Switch it off and unplug it
before cleaning the drain pump
filter.
Be careful of hot water. Allow the
water to cool down. Risk of scalding!
Clean the filter periodically every 3
months to ensure the normal
operation of the appliance.
1 Open the lower cover cap
2 Open the filter by turning to the
counter clockwise
3 Remove extraneous matter
4 Close the lower cover cap
Caution!
When the appliance is in use and depending on the programme selected there can be
hot water in the pump. Never remove the pump cover during a wash cycle, always wait
until the appliance has finished the cycle, and is empty. When replacing the cover,
ensure it is securely re-tightened.
Trouble Shooting
Whenever there is a problem with the appliance, check if you can solve it following the
tables below. If the problem persists, please contact the customer service.
Description
Appliance does not start
Door can´t be opened
Possible cause
Door is not closed
properly. Clothes are
stuck.
Safety protection is
activated.
Solution
Close the door properly and restart.
Check the laundry.
Disconnect the power and restart.