Installation Area; Unpacking The Washing Machine - Scandomestic WAH 1506 W User Manual

Installation

Installation area

Warning!
• Stability is important to prevent the product from
wandering! Make sure the machine is standing leveled and
stable.
• Make sure that the product does not stand onto the power
cord.
• Make sure to maintain the minimum distances from the
walls as shown in the picture
Before installing the machine, the location characterized as follows shall be selected:
1. Rigid, dry, and level surface
2. Avoid direct sunlight
3. Sufficient ventilation
4. Room temperature is above 0°C
5. Keep far away from the heat sources such as coal or gas burning appliances.

Unpacking the washing machine

Warning!
Packaging material (e.g. Films, Styrofoam) can be dangerous for
children. There is a risk of suffocation ! Keep all packaging well
away from children.
1 Remove the cardboard box and styrofoam packing.
2 Lift the washing machine and remove the base packaging.
Make sure the small triangle foam (a) is removed with the
bottom packaging together. If not, lay the unit down on the side surface and
remove it manually.
3 Remove the tape securing the power supply cord and drain hose.
4 Remove the inlet hose from the drum.