Operation - Kelvinator KCHST27.8 Service, Installation And Care Manual

Service and Installation Manual

OPERATION

Do not throw items into the storage area. Failure to heed these recommendations
could result in damage to the interior of the cabinet.
CAUTION
Refrigerated cabinets
Temperature range for the internal cabinets is 34°to 38°F for all food prep units, undercounter and worktop
refrigerators, and -7°F to -3°F for undercounter and worktop freezers. The rail's temperature range for all
prep units is 33°F to 41°F.
Food Prep units should operate with pans in place. Operating without pans and/or pan covers in place will
lower the efficiency and may damage the unit due to continuous over-use.
Continuous opening and closing of the door will prevent the unit's ability to maintain optimum refrigeration
temperature.
Top section is not intended for overnight storage. Product should be removed from pans. Pans can remain
in cabinet if empty.
Defrosting:
Every 6 hours, the unit will turn off so the evaporator coil can defrost. The controller now displays the
defrost symbol. When the coil temperature reaches the terminal temperature or after 20 minutes of defrost,
the unit will turn on.
SOLID-STATE THERMOSTAT DESCRIPTIONS
1. FRONT PANEL COMMANDS
To display target set point; in programming mode it selects a parameter or confirms an
operation.
To start a manual defrost
To view the last alarm occurrence; in programming mode, it browses the parameter
codes or increases the display value
To view the last alarm occurrence; in programming mode, it browses the parameter
codes or decreases the display value
KEY COMBINATION
To lock & unlock the keyboard
To enter in programming mode
To return to the room temperature display
7