Download Print this page
Schako PA-R Mounting Instructions

Schako PA-R Mounting Instructions

Roll-down grille

Advertisement

Quick Links

Contents
General information ................................................... 2
Designated use ........................................................... 2
Construction ............................................................... 2
Adjusting the grille length .......................................... 3
Replacing the blades ................................................... 4
SCHAKO | Ferdinand Schad KG
Steigstrasse 25-27
D-78600 Kolbingen
MOUNTING INSTRUCTIONS
GRILLE LENGTH ADJUSTMENT AND BLADE
Phone +49 (0) 7463-980-0
Fax +49 (0) 7463-980-200
www.schako.com| info@schako.de
PA-R
Roll-down grille

Advertisement

loading
Need help?

Need help?

Do you have a question about the PA-R and is the answer not in the manual?

Questions and answers

Summary of Contents for Schako PA-R

  • Page 1 General information ........... 2 Designated use ............2 Construction ............... 2 Adjusting the grille length .......... 3 Replacing the blades ........... 4 SCHAKO | Ferdinand Schad KG Phone +49 (0) 7463-980-0 Steigstrasse 25-27 Fax +49 (0) 7463-980-200 D-78600 Kolbingen www.schako.com| info@schako.de...
  • Page 2 General information ꟾ Designated use ꟾ Construction GENERAL INFORMATION DESIGNATED USE Prior to installation, please read completely through this man- The SCHAKO roll-down grille is a walk-on grille for installation ual. in convectors and floor ducts Cement will damage the grille surface. Keep the roll-down Suitable for the interior use in non-corrosive areas.
  • Page 3 PA-R – Roll-down grille MOUNTING INSTRUCTIONS Adjusting the grille length ADJUSTING THE GRILLE LENGTH Step 1: Loosen the spring NOTE If several holding tongs are available, the procedure can be carried out more quickly by processing all the springs at the same time.
  • Page 4 PA-R – Roll-down grille MOUNTING INSTRUCTIONS Replacing the blades REPLACING THE BLADES Step 1: Loosen the spring NOTE If several holding tongs are available, the procedure can be carried out more quickly by processing all the springs at the same time.