CGF 500 1297 73.5 Figure 2. Dimensions [mm] 3. Storage 4. Installation materials. The installation must comply Correct storage is important for the with current national regulations. Jet 4.1 Before installation function and durability of the fans. fans should in general be installed so that Unpack the jet fan by removing the top there is no risk of them falling down in and sides of the box.
5. Start of operation 6. Maintenance Emergency stops must be installed in compliance with current rules and The user must always keep the jet fans in legislation. The fans are designed for good working order. continuous operation. The To ensure functionality and life of the Max.
Page 5
6.4 Vibrations 6.7 Mounting of motors cable connector (1, fig. 7) at the The fan is factory-balanced to minimise separation from the pressure Lubricate bolts with grease, before vibrations during operation. If chamber. Push the cable fully into the screwing them in during reassembly. vibrations occur, it usually indicates pressure chamber.
7. Troubleshooting 9. Sound 13. Patents and trademarks ® The sound emissions depend on the Novenco Fans that operate in the stall installation and operation conditions, registered trademarks of Novenco area are more likely to suffer hence no general data can be given. Marine &...
Page 7
Novenco Building & Industry A/S Industrivej 22 Tel. 70 77 88 99 4700 Naestved www.novenco-building.com Denmark 18. Declaration of conformity • BS/DS/EN IEC 61000-6-1:2019 • BS/DS/EN IEC 61000-6-2:2019 Novenco Building & Industry A/S • BS/DS/EN 61000-6-3:2007 + Industrivej 22 A1:2011 4700 Naestved •...
Page 8
Pure competence in air. WWW.NOVENCO-BUILDING.COM...
Need help?
Do you have a question about the NOVENCO CGF and is the answer not in the manual?
Questions and answers