Table of Contents
Advertisement
Gilson Company, Inc.
4.0 TOUCh SCreeN OPerATION
Inputting data on the Touch Screen is as simple as pressing
the designated area with your finger. A gentle, momentary
pressure usually works better than a hard push with the fin-
ger. Using other objects on the screen is not recommended
and may damage the screen, voiding the warranty.
The Touch Screen is used both to input and display informa-
tion controlling operation of the SS-10 Shaker:
• The five upper displays show Test Time, Power level,
Interval Time, Pause Time, and Test ID.
• The six lower sections function as control buttons to
start or stop a test cycle, enable or disable vibration
intervals, lock the screen, and select a test ID. The +
and – buttons are used to input values for the various
fields (see Figure 4.0).
NOTe: The Touch-Screen display is not moisture-
resistant. Avoid the use of liquids in its vicinity and use
caution when cleaning the display. Moisture damage
to the Touch-Screen is not covered by warranty.
4.1 Test Time
Test Time is the amount of time the sample will be actively
vibrated. It is a count-down timer adjustable from 00:00 to
99:59 minutes:seconds. When the timer reaches zero, the
unit will stop vibrating and beep.
Editing the Test Time Display:
To adjust, press the Test Time display once. The outline
and numbers inside turn yellow and the first digit will flash
(see Figure 4.1). The flashing digit is adjusted using the +/-
buttons. Once adjusted to the desired value, press the Test
Time display again. The next digit will begin to flash and is
now adjustable with the +/- buttons. Continue until all the
Test Time digits are set. When changes are complete, press
the Test Time display box once while the last digit is flashing
to accept the changes and return the screen to idle.
NOTe: Pressing the touch screen anywhere other
than the Test Time box, or the +/- buttons at any time
during editing will quickly accept any changes made,
and return the screen to idle.
SS-10 Touch Screen
editing the Test Time Display
Page 6
1-Touch Vibratory Sieve Shaker: SS-10
Figure 4.0
Figure 4.1
Advertisement
Table of Contents
