Page 4
4.2 Disassembly NOTE: The SS-8R and SS-12R Sieve Shakers are equipped 1.. Disconnect.and.lock.out.the.power.supply. with a tapping mechanism which makes a loud noise. If the noise is unacceptable, consider using the SSA-805R 2.. Locate. the. four. cover. mounting. screws,. and. remove.
Page 5
•..Unit is Unstable; Shakes or Walks Too Much: a.. Readjust. level. using. the. leveling. legs,. and. lock. with. lock. nuts... b.. For. SS-12R,. be. sure. that. weighted. platform. adapter. is. used.when.using.8in.test.sieves. c.. Loosen.and.re-clamp.the.sieve.stack. d.. Check.sieve.stack.height..If.over.20in,.see.Section.3.0. Gilson Tapping Sieve Shaker Manual...
Need help?
Do you have a question about the SS-8R and is the answer not in the manual?
Questions and answers