The Performer III is designed for operation on 115V/60Hz power supplies. Connection to other power sources will damage this machine and void the warranty. Contact Gilson Technical Support if operation on an alternative power source is required. ALWAYS make sure the available power supply matches the device requirements.
III components and accessories. If there is damage or if parts are Connector housing (see Figure 2) and verify the connector is missing, contact Gilson Customer Service immediately at 800- locked in place. The Performer III is now ready for use.
Gilson Company, Inc. Performer III 3in Sieve Shaker: SS-3 ASSEMBLING THE SIEVE STACK OPERATING INSTRUCTIONS Assemble the sieve stack by placing the desired sieves on the To begin testing, set the Mode Switch to MANUAL (see Figure 6). collection pan. Start with the finest mesh sieves, placing pro- Adjust the Amplitude Control for optimum performance with the gressively coarser sieves on top (see Figures 4 and 5).
9.5mm to 25µm (3/8in to No.500 Sieve) Power Requirements*: 115V, 50/60Hz, 2A The Setting and the Mode values are saved automatically and restored on power up. *Contact Gilson Technical Support for operation of this device on other power supplies. Figure 5 Performer III Timer Page 6...
Gilson Company, Inc. Performer III 3in Sieve Shaker: SS-3 PARTS DIAGRAMS Sieve Base Timer Amplitude Control Mode Switch Figure 6 Performer III Control Panel Captive Knobs with Release Buttons Tapper Assembly Sieve Base Spacers Tapper/Clamping Assembly Base Power Cord Sieve Base...