Gilson Company, Inc. 1-Touch Vibratory Sieve Shaker: SS-10 SAFeTy INSTrUCTIONS You are responsible for the safe operation of this Sieve Shaker, and maintaining this equipment in compliance with these instructions. You must read and completely un- derstand these operating and safety instructions before using this machine.
Gilson Company, Inc. 1-Touch Vibratory Sieve Shaker: SS-10 Table of Contents Page Safety Instructions Uncrating & Assembly Instructions Preface Clamping System Touch Screen Operation Test Time Interval & Pause Time Power Level Test ID Lock/Unlock Screen Button Start/Stop & Pause/Resume Buttons...
4. The plastic Clearance Spacer (2) is secured for ship- ping to the top of the SS-10 Base Assembly with three 1/4-20 x 1.75 stainless steel flat-head screws (4). Us- ing the included Allen key wrench, remove the three screws and set aside.
1-Touch Vibratory Sieve Shaker: SS-10 3.0 ClAMPING SySTeM Clamping down the sieve stack Gilson sieve clamps are designed for efficiency, ease of use, and rugged dependability. They allow fast, easy insertion and removal of sieve stacks, while insuring that sieves are tightly secured in place during testing.
Using other objects on the screen is not recommended and may damage the screen, voiding the warranty. The Touch Screen is used both to input and display informa- tion controlling operation of the SS-10 Shaker: • The five upper displays show Test Time, Power level, Interval Time, Pause Time, and Test ID.
Gilson Company, Inc. 1-Touch Vibratory Sieve Shaker: SS-10 4.2 Interval & Pause Time The Interval feature allows timed pauses to be introduced into cycles of active vibration. Separation of some materials Interval & Pause Time is improved by interruptions in the vibration cycle that promote particle reorientation.
Gilson Company, Inc. 1-Touch Vibratory Sieve Shaker: SS-10 4.3 Power level Power Level is the amount of vibration produced by the unit. editing Power level Settings Vibration intensity on a relative scale between 1 (low) and 10 (high) can be selected. Actual vibration amplitude and...
Pressing resume continues the test at the time remaining. The SS-10 accepts up to eight full-height or sixteen half- height round test sieves of 8in (203mm) or 200mm diameter plus pan. Note that 8in and 200mm sieves cannot be used in the same stack.
Gilson Company, Inc. 1-Touch Vibratory Sieve Shaker: SS-10 6.0 PArTS lIST Item Part No. Description req’d WGV8-BASE_ASSY Base Assembly WGV8-SPACER Clearance Spacer WGV8-BOTTOM_COVER_ASSY Bottom Cover Assembly WGSW-252175FAMSS 1/4-20 x 1.75 Flat Head Allen (Stainless) WGV8-CLAMP_ROD Clamp Rod WGV8-TOP_COVER_ASSY Top Cover Assembly...
Gilson Company, Inc. 1-Touch Vibratory Sieve Shaker: SS-10 7.0 GIlSON SIeVeS Gilson stocks the widest range and largest quantity of sieves overloading individual sieves. The frame diameter selected of any major supplier. Immediate shipment is available for must also fit the sieve shaker being used. Most common sizes are normally in stock.
ASTM standard E 11, Specification for Wire Cloth and by hand. The Cover-with-Ring has a wire finger loop in the Sieves for Testing Purposes. Gilson is leading the way in educating our customers about the new specification and center to facilitate removal.
Page 14
±1.25% of sample weight). Certificate of e 11 Compliance for all Sieves Ordering All Gilson test sieves meet ASTM or ISO requirements for Compliance Test Sieves. Ordering additional verification services for each individual sieve upgrades them to meet Inspection or Calibration specifications.