Table of Contents
Advertisement
about:blank
LH SIDE
1. Use drill bit 3 mm (1/8 in)[T3]
2. Seal plate [P13]
Repeat same operation for RH side.
Stick seal [P14] behind seal plate [P13].
1. Seal plate [P13]
2. Seal [P14]
Repeat same operation for RH side.
Install the seal [P14] and seal plate [P13] onto rear cargo using three (3) K50 X 20 torx screws [P15]. Tighten to specification.
1. Seal [P14] and LH seal plate [P13]
2. K50 X 20 torx screw [P15]
6 of 15
10/27/2017, 1:15 PM
Advertisement
Table of Contents
