1. Harness
2. Grommet
On a table, drill two (2) 2.5 mm (7/64 in) holes onto cargo cover [P1].
NOTICE
Drill very gently so the outer wall won't break and the visible part of the cargo cover [P1] won't be damaged.
1. Use drill bit 2.5 mm (7/64 in)[T6]
Drill six (6) 6 mm (15/64 in) holes which will serve to secure harness onto inner side of the cargo box [P1].
NOTICE
Drill very gently in order to drill through only one wall and the visible part of the cargo cover [P1] won't be
damaged.
1. Use drill bit 6 mm (15/64 in)[T4]
13 of 15
about:blank
10/27/2017, 1:15 PM