Acomdata HD250UFAPE5 User Manual page 31

FIGURE 41
10. In the Retrospect Button Backup: Sources window, click OK.
11. In the Backup: Retrospect Button Backup window, click Destinations
12. In the Backup Set Creation window (Figure 42), select Removable Disk from the
Backup set type pull-down menu.
FIGURE 42
13. If you wish to set up a password that will be required every time you perform a
backup, click the Secure... button and follow the instructions. When you're done,
you will be taken back to the Backup Set Creation window.
14. In the Name field, type in a name for this Backup Set. The default name is "Backup
Set A." You can use the default name or create your own. The name you use will later
on be assigned to the AcomData Drive. For example, if you name the Backup Set "My
Backups", the name of your AcomData Drive will be "1-My Backups." The "1" indicates
that the Drive is the first disk in the Backup Set. If you were to add additional disks to
this Backup Set they would be named "2-My Backups", "3-My Backups" etc.
15. Click New... You will then see the Choose a folder widow, asking you to select a
location where Retrospect Express will save the catalog file for your Backup Set. The
catalog file is the file that Retrospect Express uses to keep track of the files in the
– 31 –