Ush Utton Ackup For Ac; System Requirements - Acomdata HD250UFAPE5 User Manual

P B ™ B
USH UTTON ACKUP
M
FOR AC

System Requirements

The following system requirements are for PushButton™ Backup only. The system re-
quirements for your specific AcomData Drive can be found in your Drive's User's Guide.
• Power Macintosh (G5, G4, G3, iBook or iMac)
• Mac OS X v.10.2 or later
• 128 MB RAM
Mac OS X v.10.2 + Users:
While we highly recommend using PushButton™ Backup for its ease and simplicity, it
is possible to run backups from the Retrospect Express user interface. If you want to
run backups without using the PushButton™, you do not need to install the AcomData
PushButton™ Manager. You only need to install Retrospect Express.
Mac OS X v.10.1.5 Users:
You can use the same version of Retrospect Express that is supplied for PushButton™
Backups, except you cannot run backups from the PushButton™. Rather you would
run backups via the Retrospect Express user interface.
Mac OS 9 and pre-OS 10.1.5 Users:
We have included Retrospect Express v. 5.1, which will allow you to run backups via the
Retrospect Express user interface. Go to "Install Retrospect 5.1. "
– 19 –