Setting Up The Button Backup Script - Acomdata HD250UFAPE5 User Manual

Setting up the
Button Backup Script
Before you can use PushButton™ Backup, you will need to set up the Button Backup
script.
1. Press the PushButton™ on the front of the Drive. You will see the alert below (Figure
29). Click Open.
FIGURE 29
2. You will be asked to type in your administrator password. This is the password you
use to log in to your computer. Do so, then click OK.
3. You will see the Retrospect license code on the window. Click OK.
4. Next, the display will ask you to register your copy of Retrospect Express. To regis-
ter, click Register Now and complete the registration form that appears.
5. The Retrospect Button Backup wizard should appear (Figure 30). If it does not,
press the PushButton™. In the Retrospect Button Backup wizard, click Next. You
will be taken through three easy steps to setup the script.
FIGURE 30
– 25 –