Table of Contents
Advertisement
8. Once installation is complete you will see an alert with the message: "Installation
was successful..." (Figure 24) Click Quit.
FIGURE 24
If you wish to install the AcomData PushButton™ Manager to run backups via the
PushButton™, proceed to the next section: "Installing the AcomData PushButton™
Manager." Otherwise, restart the computer and Retrospect Express will be ready
to use. For information on how to use Retrospect Express see the Help menu in
Retrospect Express.
Installing AcomData PushButton™ Manager
1. In the AcomData PushButton™ Backup CD window, double-click the DMBtMgr_
Install icon.
2. You will see the message displayed in Figure 25. Installation of the DMBtMgr can-
not run from the CD because the installer needs to write data back to itself during
installation. Click Continue. Once the DMBtMgr file has been copied, a new win-
dow containing the copied file will open. Double-click the DMBtMgr icon in that
window.
FIGURE 25
3. The Authenticate window will appear with the message "Install Retrospect Express
requires that you type your password. " This is the password you use to log on to your
computer. Type in your password and click OK.
– 22 –
Advertisement
Table of Contents
