nedis HPBT5052BK Quick Start Manual page 7

Pairing the earphones to a Bluetooth audio
source
1. Take out the earphones from the charging case, the
earphones will switch on automatically.
4 Press and hold both earphone buttons A
seconds to switch the earphones on manually.
2. The status indicator LED A
to blink blue/red while the right earphone blinks blue to
indicate the earphones are pairing.
3. Enable bluetooth on the device you want to pair the
earphones with.
4. Select "HPBT5052BK" from the list of available Bluetooth
devices on your device.
Charging the product (image B)
1. Plug the micro USB cable A
2
A
.
2. Plug the other end of A
adapter.
3. Plug the power adapter into a power outlet.
4
Or use a wireless charging pad to charge the charging case.
4. The charging indicator LEDs A
progress of the battery.
5. Place the earphones into the respective slots A
close the lid A
6
6. A
on the earphones lights up red.
6
7. A
will switch off when the earphones are fully charged.
4
The earphones and the charging case can charge
simultaneously.
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product
HPBT5052BK from our brand Nedis
has been tested according to all relevant CE standards and
regulations and that all tests have been passed successfully.
This includes, but is not limited to the RED 2014/53/EU
regulation.
The complete Declaration of Conformity (and the safety
datasheet if applicable) can be found and downloaded via
webshop.nedis.com/hpbt5052bk#support
For additional information regarding the compliance, contact
the customer service:
Web: www.nedis.com
6
9
9
into a computer or power
1
to charge the earphones.
7
5
on the left earphone starts
into the micro USB port
3
indicate the charging
, produced in China,
®
7
A
for 3
4 8
A
and