Figure 18 - End Recording Button - Itamar Medical WatchPAT ONE Operation Manual

Figure 18 – END RECORDING button
g. Test Completion Screen
The analysis of your sleep data will be based on the data that was collected during
your sleep. The data that was collected after you wake up will be ignored. Therefore,
there is no need to keep the device on your hand after your sleep is fully over. After
you have pressed the END RECORDING button on the Application's screen, you may
take off the device, the Finger Probe and Chest Sensor.
If the Application needs more time for offloading the data from the device, it will
display a screen (like the ones in Figure 19) asking you to allow some more time for
the process to complete. A progress indication will be provided. Please follow the
guidance that is provided in the Application's screens and do not close the Application
until you are asked to do so.
™
31 Operation Manual
WatchPAT ONE System