Dometic 8700 Series Installation And Operating Manual page 8

Installing the awning
A
NOTICE! Damage hazard
• Ensure that the awning rail is parallel to the RV floor, and is not warped
or curved before installing awning fabric. If the awning rail is not
straight, the awning fabric may wrinkle or stretch.
• Install back channels on a flat surface, level, and keep parallel with
each other to ensure correct function and appearance.
• Use sealant after cleaning the parts and surfaces where fasteners enter
the RV's roof and/or walls to prevent moisture from entering.
• Observe the sealant manufacturer's instructions.
I
NOTE
• A stepladder may be necessary to reach awning rail.
• Make sure arm assemblies do not restrict use of doors, windows, etc.
• It's recommended 2 people install the awning. There are instances
detailed in the installing instructions that require 3 people to fit the
awning.
8
Dometic8700
EN