Contour Next EZ User Manual page 9

Check your display to ensure that results are being displayed in
mg/dL. If they are not, contact Customer Service. See Contact
Information.
Customizable: The C
personal choices for some features. For more information, see
section 3, Setup and Use.
Important Safety Information
• Always keep the test strips in the
original bottle. Tightly close the bottle
immediately after removing a test
strip. The bottle is designed to keep
the test strips dry. Exposure to room
humidity from leaving the bottle open or
not storing them in the original bottle can
damage your test strips. This could lead
to inaccurate test results.
• Always wash your hands well with soap and water and
dry them well before and after testing, handling the
meter, lancing device, or test strips.
• Test strips are for single use only. Do not use a test
strip that appears damaged or has been used.
• Your test strip is designed to easily "sip" the blood
into the sample tip. Do not drop blood directly on the fl at
surface of the test strip.
• Do not press the test strip against your fi nger when
testing. This may block the sample tip.
• Let the meter and test strips adjust to the temperature
where you are testing. Whenever the meter is moved
from one location to another, allow approximately
20 minutes for the meter to adjust to the temperature of
a new location before performing a blood glucose test.
The meter has been designed to give accurate results at
temperatures between 41°F and 113°F.
N
ONTOUR EXT
EZ meter allows you to set
6