Lexmark B3340 User Manual page 57

Use printer menus
Menu item
Enable Auto IP
On*
Off
DNS Address
Backup DNS
Backup DNS 2
Backup DNS 3
Enable DDNS
Off*
On
DDNS TTL
Default TTL
DDNS Refresh Time
Enable mDNS
On*
Off
WINS Address
Enable BOOTP
On
Off*
MTU
Raw Print Port
1–65535 (9100*)
Outbound Traffic Maximum
Speed
On
Off*
Enable TLSv1.0
On*
Off
Enable TLSv1.1
On*
Off
SSL Cipher List
Note: An asterisk (*) next to a value indicates the factory default setting.
SNMP
Note: This menu appears only in network printers or printers that are attached to print servers.
Description
Assign an IP address automatically.
Specify the current Domain Name System (DNS) server address.
Specify the backup DNS server addresses.
Update the Dynamic DNS settings.
Specify the current DDNS settings.
Update multicast DNS settings.
Specify a server address for Windows Internet Name Service (WINS).
Allow the BOOTP to assign a printer IP address.
Specify a maximum transmission unit (MTU) parameter for the TCP connections.
Specify a raw port number for printers connected on a network.
Enable the printer maximum transfer rate.
Enable the TLSv1.0 protocol.
Enable the TLSv1.1 protocol.
Specify the cipher algorithms to use for the SSL or the TLS connections.
57