Generating A New License Key; Entering A New License Key - Cambium Networks PTP 800 Series User Manual

PTP 800 Series User Guide
At t r ibu t e
Transmit Capacity

Generating a new license key

To generate a new license key to activate new licensed capabilities (for example activate
AES encryption or increase transmit capacity), proceed as follows:
Purchase the required new capabilities from the Cambium authorized Point-To-
1
Point dealer who supplied the link. The dealer will supply one or more access keys.
Go to the PTP web support page (see
2
Select Key Generator. The PTP License Key Generator form should be displayed.
3
Enter the required details, including the access keys supplied by the dealer.
4
Submit the web form. The PTP License Key Generator will respond with the new
5
license key.

Entering a new license key

To upgrade the unit to a new license key, select menu option System, License Key. The
Software License Key page is displayed
Validate license key. If the license key is valid, a confirmation message is displayed.
Select OK to confirm. The new license key is installed in the unit.
phn- 2513_004v000 ( Oct 2012)
M e a n ing
Maximum permitted data rate for Ethernet frames. The
actual data rate depends upon the prevailing wireless
conditions.
The application software does permit a link to be
established between units with different Transmit Capacity
values.
A full capacity trial period may be available on this unit.
For more information, see
on page 6-24.
Contacting Cambium Networks
(Figure
Task 3: I nst alling license keys
Starting the full capacity trial
118). Enter the new License Key and select
on page 2).
6- 23