Reflecta x7-Scan User Manual page 52

(b) Plug the USB mini B of the supplied AC adaptor to
the USB port of the reflecta x7-Scan, and plug the
adaptor to the power outlet.
Please charge the battery at least 2.5~3 hours
3. Red LED will light on during charging. When the
battery pack is fully charged, the red LED light will be
off and you may disconnect the charging connections.
Status LED:
1. Scanner with Battery type:
Red: The reflecta x7-Scan is OFF, the battery is charging;
Purple: The reflecta x7-Scan is ON and the battery is
charging from the AC adapter;
Blue: The reflecta x7-Scan is turned ON.
2. Scanner without Battery type:
Blue: The reflecta x7-Scan is ON with USB cable or
adaptor connected.
-10-