RS2035 EN
2/12/04
10:06 AM
Radio
Selecting Tuner Band
1. Press TUNER•BAND•APP on the main unit or
tuner on the remote control to select TUNER.
2. Press TUNER•BAND•APP on the main unit or
band•app on the remote control to select
radio band.
Tips:
Your audio system has 30 preset stations.
Tuning to a Station
Press TUNING -
or +
tune
or
to select frequencies.
Manually Setting Presets
1. Press TUNING -
or tune
or
frequency.
3. Press the PROG•SET•CLEAR button once.
4. The most recently accessed program location
will be displayed.
5. If a different program location is preferred,
press PRESET STATION UP
select the desired preset number (1-30).
6. Press PROG•SET•CLEAR to store the selected
frequency at that preset.
Page 15
Auto Preset Programming
(FM only)
Press and hold the TUNER•BAND•APP button for
2 seconds to scan stations in FM band. The
stations will then be stored as preset channels. A
maximum of 30 stations can be stored. Beware of
your preset channels being erased accidentally
because the scanning and storing process is auto-
matic upon pressing the button. You can stop the
automatic scan by pressing any button, but the
erased stations cannot be recovered.
Accessing Preset Stations
Press PRESET STATION UP
the previous or next preset station. The
display first shows the preset program number
on the main unit or
and after a few seconds, the frequency will be
displayed. (PR 01 FM is FM preset 1)
Suppressing Stereo Signal
or +
on the main unit
Press
to access the desired
stereo for stereo FM stations.
or DN
to
or DN
to access
to toggle between FM mono and
EN
10