Download Print this page
RCA RIR205 Quick Start Manual
Hide thumbs Also See for RIR205:

Advertisement

Quick Links

QuickStartGuide
Congratulations on purchasing your new RCA Wi-Fi Internet Radio.
Please follow these instructions to set up and start using the radio.
Unpack the unit
1
You should fi nd the following items in the box:
Radio
Wi-Fi Enabler
Power adapter
(for radio)
Quick Start
Guide (this
leafl et)
Ethernet cable
AM loop antenna
Additional requirements
Broadband Internet service
Broadband (cable/DSL) modem, usually supplied by your Internet service provider
Ethernet router/switch/hub with available LAN port
Setup your RCA Infi nite Radio accounts
2
To simplify setup and avoid manual confi guration on the radio please complete these steps:
1. Find the Setup Information Card that contains your radio's MAC address number (MAC:
00-00-00-00-00-00) and activation PIN # (PIN: 0000). (This number is also found in the Device
Info screen under the Settings menu in your radio.)
2. Using any Internet-connected computer, go to www.rcainfi niteradio.com/setup and follow
the online instructions.
You will need to input your radio's MAC address and PIN # to associate your radio with your
personal settings.
v1.0 (EN)
Connect the RCA Wi-Fi Enabler to your network
3
If your modem or router/hub/switch has only one LAN
RIR205
port and is connected to your PC, disconnect the
www.rcaaudiovideo.com
Ethernet cable from the modem/router/hub/switch and
connect it to the Enabler's LAN port.
LAN
Broadband modem or
Ethernet router/hub/switch
1. Connect an ethernet cable from the Enabler's "WAN" port to a LAN port on your broadband
modem or Ethernet router/hub/switch.
Power adapter
(for Wi-Fi Enabler)
2. Connect the power adapter to the Enabler. Plug the adapter into an electrical outlet.
Setup
3. Make sure the power, WAN, and Wireless LEDs are on. The mode LED state will vary depending
Information
on your network confi guration. If the Mode, WPS/Scan, and Wireless LEDs are blinking
Card
simultaneously, this indicates that there is a possible error in connection. Please review your
connections and then press and hold the WPS/Scan button at the front of the Enabler for 3
seconds to rescan your network confi guration. Go to www.rcainfi niteradio.com/enablersetup
for more information.
Insert AAA batteries in the base of the radio
4
!
LAN
er
LAN
pow
Electrical outlet
rese t
WAN
Follow the polarity markers in the battery
compartment.
The batteries (not included) power the
clock and alarm whenever the radio loses
electricity.
Plug in and turn on the radio
5
Electrical outlet
Deactivate the DEMO mode
Press preset 1, then SLEEP/
SNOOZE, then preset 6.
1.
NOTE:
When you turn on the radio for the fi rst time,
Use the navigation controls to make
it will be in
"DEMO"
mode. To exit this mode, press
choices and input information:
preset 1, then SLEEP/SNOOZE, then preset 6 on
top of the radio.
2. After exiting the DEMO mode,
the radio displays the Select
Language screen. Choose
your preferred language.
- move highlight up
- move highlight down
REMINDER:
If your unit is unable to connect to
- move selection/navigate left
your Enabler and you have already checked all the
- move selection/navigate right
SELECT - confi rm selected option or
connections to the enabler, please press and hold
character
the WPS/Scan button at the front of the Enabler
for 3 seconds to rescan your network confi guration.
When inputting characters, press
Go to www.rcainfi niteradio.com/enablersetup for
to choose among uppercase, lowercase,
more information.
numeric, or special characters.
To insert spaces or correct mistakes, press
3. If you did not activate your Infi nite Radio accounts,
to display the Commands list and then
or if the radio cannot get your details from the
press
command.
Infi nite Radio server, the radio may ask for your ZIP
code. Input your code.
Press
to show "DONE"
and SELECT to confi rm.
Press
or
to highlight,
SELECT to confi rm.
If your radio has successfully connected to the Internet you will hear a welcome message.
Learn more about your Internet Radio
Read the user manual (download from www.rcainfi niteradio.com) for more information on the
player's features, safety and warranty information, and answers to Frequently Asked Questions (FAQ's).
Need more help?
Do not return this product to the store.
Visit www.rcainfi niteradio.com to get the latest fi rmware updates and FAQ's.
after turning on
or
or
to choose the desired

Advertisement

loading

Summary of Contents for RCA RIR205

  • Page 1 Electrical outlet www.rcaaudiovideo.com Ethernet cable from the modem/router/hub/switch and Congratulations on purchasing your new RCA Wi-Fi Internet Radio. connect it to the Enabler's LAN port. Please follow these instructions to set up and start using the radio. Unpack the unit...
  • Page 2 Controls Using the radio Listening to Internet radio General procedures Choose an Internet radio station Press SOURCE to choose Internet Radio. Turn on/off (standby) the radio Press ON/STANDBY. Press to move up and Sleep timer/ Station presets Choose an audio source Press SOURCE to cycle through the audio sources down the menu options and snooze...