Important Safety Instructions - Bestway White Cap Owner's Manual

Owner's manual
Warning

IMPORTANT SAFETY INSTRUCTIONS

Read the manual and follow the instructions relating to safety tips, correct
and complete product assembly, setting into service, use and maintenance.
For your own safety, always heed the advice and warnings in these
instructions. Non-compliance with these operating instructions may expose
you to serious danger or death. Only use the product in the places and
conditions for which it is intended.
Stand-up Paddling is a dangerous sport. Use of this product exposes the
user to unexpected risks, dangers and hazards.
User should realize and understand these risks. The use of this product
implies the respect of the safety instructions described in the manual.
Do not exceed the maximum recommended number of persons. Regardless
of the number of persons on board, the total weight of persons and
equipment must never exceed the maximum recommended load.
Do not use this product if you are under the influence of alcohol, drugs or medications.
Life saving devices such as life jackets and buoys should be pre-inspected and used at all times. Always wear a helmet
when using this product.
Always paddle with an experienced partner when using this product.
Tell your sail routes and time schedule to your partner.
Check the weather forecast first to know the marine environment and weather conditions before starting. Bad weather
and marine environment is very dangerous.
Never use this product in conditions that are beyond your ability (such as, but not limited to, high surf, riptides, currents
or river rapids)
Use the product near the shore and beware of natural factors such as wind, tidewaters and tidal waves. BE AWARE OF
OFFSHORE WINDS AND CURRENTS.
Before every use, carefully inspect the product for signs of wear or leakage to ensure everything is in good condition.
Please do not use the SUP if you find any damage.
Do not surf in unfamiliar water areas.
Beware of potential harmful effects of liquids such as battery acid, oil and petrol. These liquids may damage the product.
Inflate according to the rated pressure on the product or it will cause over inflation and/or an explosion.
Stay balanced. Uneven distribution of loads on the board may cause the board to overturn which could lead to drowning.
Know how to operate this product. Check your local area for information and/or training as needed. Inform yourself about
local regulations and dangers related to surfing, boating and/or other water activities.
SAVE THESE INSTRUCTIONS
Technical Specifications
Item Inflated Size
65080 65081 2.74 m x 76 cm x 10 cm (9' x 30'' x 4'')
65065 65066 2.85 m x 76 cm x 10 cm (9'4'' x 30'' x 4'')
65067 65068 3.05 m x 76 cm x 10 cm (10' x 30'' x 4'')
65069 65070 3.05 m x 81 cm x 10 cm (10' x 32" x 4")
65078 65079 3.20 m x 81 cm x 12 cm (10'6'' x 32" x 5")
65073 65074 3.30 m x 76 cm x 12 cm (10'10'' x 30" x 5")
65082 65083 3.35 m x 76 cm x 15 cm (11' x 30" x 6")
65085 2.04m x 76cm x 10 cm (6'8" x 30" x 4")
#65065; #65067; #65069; #65078; #65073; #65082; #65080
001 002 003
007 008
SPARE PART SPARE PART
Part No. Description QTY
NO. (#65065) NO. (#65067)
Surf Board 65065ASS17 65067ASS17 65069ASS17 65078ASS17 65073ASS17 65082ASS17 65080ASS17
001 1
High
Pressure
002 P3046B P3046B
Hand 1
Pump
F6C298Q17 F6C298Q17 F6C298Q17 F6C298Q17 F6C298Q17 F6C298Q17 F6C298Q17
003 Oar 1
Footrest
004 1 P5C499 P5C499
Tube
Footrest
005 1 F6C211 F6C211
Foam
Safety
1
006 P6C786 P6C786
Rope
007 1 F6C336 F6C336
Seat
Pressure
008 1 P5C412 P5C412
Gauge
1
009 F6H189 F6H189
Wrench
Polyester
010 1
3-ply patch
1
011 Bag F6561 F6561
012 1 P6H971 P6H971
Air valve
Elastic Cord 1
F2C098 F2C098
013
#65066; #65068; #65070; #65079; #65074; #65083; #65081; #65085
001 002 003
005 006 007
S-S-005420/21x28.5cm/(拉丝冲浪板说明书)/(65065,65066,65067,65068,65069,65070,65073,
65074,65078,65079,65080,65081,65082,65083,65085)/JS-YF-2016-B-11232/英
Recommended Maximum Load Maximum Number
Working Pressure Capacity of Persons
0.827bar (12psi) 75kg (165lb)
1 adult
0.827bar (12psi) 75kg (165lb) 1 adult
0.827bar (12psi) 90kg (198lb) 1 adult
0.827bar (12psi) 95kg (209lb)
1 adult
0.827bar (12psi) 120kg (265lb) 1 adult
0.827bar (12psi) 115kg (254lb) 1 adult
0.827bar (12psi) 145kg (320lb)
1 adult
0.827bar (12psi) 60kg (132lb) 1 adult
004
005 006 013
009 010 011 012
SPARE PART SPARE PART SPARE PART SPARE PART
NO. (#65069) NO. (#65078) NO. (#65073) NO. (#65082)
P3046B P3046B P3046B P3046B
P5C499 P5C499 P5C499 P5C499
F6C211 F6C211 F6C211 F6C211
P6C786 P6C786 P6C786 P6C786
F6C336 F6C336 F6C336 F6C336
P5C412 P5C412 P5C412 P5C412
F6H189 F6H189 F6H189 F6H189
F6561 F6561 F6561 F6561
P6H971 P6H971 P6H971 P6H971
F2C098 F2C098 F2C098 F2C098
010
004
009
008
SPARE PART SPARE PART
Part No. Description QTY
NO. (#65066) NO. (#65068)
Surf Board 1 65066ASS17 65068ASS17 65070ASS17 65079ASS17 65074ASS17 65083ASS17 65085ASS17
001
High
Pressure
002 P3046B P3046B
Hand 1
Pump
003 Oar 1 F6C299Q17 F6C299Q17 F6C299Q17 F6C299Q17 F6C299Q17 F6C299Q17
Safety
004 1 P6C786 P6C786
Rope
Pressure
005 1 P5C412 P5C412
Gauge
006 Wrench 1 F6H189 F6H189
Polyester
007
1
3-ply patch
008 Bag 1 F6561
Air Valve
1 P6H971 P6H971
009
1
010 Elastic Cord F2C098 F2C098
Installation
1. Spread out the surf board on level ground.
2. Use your board at first time or after long period storage, check the air valve and tighten the valve with the provided
wrench first. (Fig. 1).
Attention: Don't adjust the air valve when the board is in use.
Warning: Don't rotate the wrench counterclockwise when inspect the inflation, or it will be danger.
3. Inflate the board by unscrewing the cap of the air valve (Fig.2 Pos.1). Ensure that the inner spring valve is not
depressed. If it is depressed (Fig.2 Pos. 2), press the spring valve and turn counter clockwise so the inner spring
valve is in the correct position (Fig.2 Pos. 3). Attached the pressure gauge onto the hose and the hose to the inflate
position on the high-pressure hand pump. Inflate the board to 0.827bar (12psi). After inflation, screw the cap of air
valve (Fig.2 Pos. 4)
NOTE: If over-inflation occurs, press the spring valve to release air to an acceptable level and securely fasten the air
valve.
NOTE: If the board is not in use and exposed under the sun, it may cause overexpansion and damage the board. Check
the pressure and deflate slightly until the correct pressure is obtained.
NOTE: Pressure gauge is for inflation purpose only, and the value of the pressure gauge is just for reference, should not
be used as a precision instrument.
Fig. 1
4. Assemble the seat (Included with product #65065, #65067, #65069, #65078, #65073, #65082, #65080 only). Connect
the seat to the D-ring on the board. The seat can be adjusted to accommodate the footrest.
5. Attach the safety rope to the tow ring, and place the belt around your ankle (Fig.3).
SPARE PART
NO. (#65080)
Fig. 3
P3046B
Oar Installation
Adjust the oar length according to your height.
P5C499
Take your height and add 8" for surfing length and 10" for touring length.
F6C211
P6C786
F6C336
P5C412
F6H189
Deflation
F6561
P6H971
F2C098
Storage
1. Deflate the board by unscrewing the cap of air valve, press the spring valve and turn clockwise.
2. Remove all the accessories from the board. Use a cloth to gently dry all surfaces. Keep the board and all accessories
clean and dry.
3. Fold the board from front to back to remove additional air. You can also drain any remaining air using the high
pressure hand pump by connecting the hose to the deflation port on the high-presure hand pump.
4. Store in a cool, dry place and out of children's reach.
Repair
• Fully clean the area to be repaired.
• Cut the correct size from the repair patch material.
• Apply only the amount of glue (not included) needed to cover the repair site.
• Press the repair patch firmly to repair site for 30 seconds.
• Wait for 1 hour before inflation.
3
SPARE PART SPARE PART SPARE PART SPARE PART
NO. (#65070) NO. (#65079) NO. (#65074) NO. (#65083)
P3046B P3046B P3046B P3046B
P6C786 P6C786 P6C786 P6C786
P5C412 P5C412 P5C412 P5C412
F6H189 F6H189 F6H189 F6H189
F6561 F6561 F6561 F6561 F6561
P6H971 P6H971 P6H971 P6H971
F2C098 F2C098 F2C098 F2C098
1 2 3
Fig. 2
MAX
MAX
Easily adjust the length
SPARE PART SPARE PART
NO. (#65085) NO. (#65081)
65081ASS17
P3046B P3046B
/ F6C299Q17B
P6C786 P6C786
P5C412 P5C412
F6H189 F6H189
F6H433Q17 F6561
P6H971 P6H971
/ F2C098
4
S-S-005420