Acer V58 User Manual page 19

1.10.2 Installing the ISA Cards
Both PnP and non-PnP ISA cards require specific IRQs.
installing ISA cards, make sure that the IRQs required by these cards
are not previously assigned to PCI devices to avoid resource conflicts.
Follow these steps when installing ISA cards:
1. Remove all PnP cards installed in the system, if any.
2. Turn on the system, enter BIOS utility and set the Reset
Resource Assignments parameter to
data assigned to the PnP devices. Refer to section 2.4.7.
3. Install non-PnP ISA cards.
4. Turn on the system.
5. Use Windows 95 or ICU to manually assign the appropriate IRQs
to the cards. This ensures that BIOS will not use the resources
assigned to the non-PnP ISA cards.
BIOS detects and configures only PnP cards.
6. Turn off the system.
7. Locate the expansion slots and install the PnP ISA and PCI cards.
8. Turn on the system.
configures the PnP ISA and PCI cards with the available
resources.
System Board
Yes to clear the resource
This time PnP BIOS automatically
When
1-19