OpenEye OE-C3012T4 Quick Start Manual

CONNECTIONS
1
1
2
1
Waterproof Cable
5
4
1 1 Thread lock cap Thread lock cap
2 2 Rubber plug Rubber plug
3 3 RJ45 enclosure RJ45 enclosure
Liberty Lake, WA, USA
509.232.5261
openeye.net
1 1 RJ-45 RJ-45 For network and PoE connections For network and PoE connections
Power Power
2 2 1 1 12vDC 12vDC Power connection Power connection
(12vDC) (12vDC)
To restore the camera to factory To restore the camera to factory
defaults: defaults:
1. 1. Disconnect power for 30 Disconnect power for 30
seconds. seconds.
1 1 Reset Button Reset Button
2. 2. Reconnect power and wait Reconnect power and wait
30 seconds. 30 seconds.
3. 3. Press and hold the reset Press and hold the reset
button for 20 seconds. button for 20 seconds.
Supports up to 512GB microSD Supports up to 512GB microSD
card for Edge storage. card for Edge storage.
2 2 MicroSD Card Slot MicroSD Card Slot Do not add or remove the Do not add or remove the
microSD card when the camera microSD card when the camera
is powered on. is powered on.
2
1
3
2
4 4 Rubber "O" ring Rubber "O" ring
5 5 Camera cable Camera cable
Copyright ©2020 OpenEye.
All Rights Reserved. Information contained in this document is
subject to change without prior notice. OpenEye does its best to
provide accurate information but cannot be held responsible for
typos or mistakes.
This quick start guide provides only basic information on the camera's settings and
operation for initial installation. Please read the user manual for optimal camera
confi gurations.
37465AB
QUICK START GUIDE
OE-C3012T4
4MP | Autofocus | Turret
openeye.net