Thermostat Features; Standard Hvac System Connections - Ecolink Z-Wave TBZ500 Installation & Operation Manual

4x 2x 2x 1x
Figure 1.
Z-Wave Thermostat Front View
Box Contents
• 1 Z-Wave Thermostat
• 1 Sheet Adhesive Wiring Labels
• 2 Plastic Wall Anchors
• 2 Phillips Screws
• 4 AA Batteries
4
TBZ500_manual_8_5x5_5_inch Combined_RDN1240221.indd 4
TBZ500
BATTERY POWERED Z-WAVE THERMOSTAT
INSTALLATION INSTRUCTIONS
The Z-Wave Thermostat (TBZ500) is a programmable, Z-Wave communicating thermostat. It can be powered using 24VAC (if
both "R"&"C" wires are available at the thermostat) or using four (4) AA batteries. Using Z-Wave technology, end users have the
ability to use many Z-Wave enabled control panels and Z-Wave hubs to control the thermostat, configure programming settings,
as well as to display current conditions in the home or office.
Features Include:
• A fixed format display with white backlight
• Heating and cooling setup display options
• System mode (OFF, Heat, Cool,Auto, E-Heat)
• Fan mode control and display (Auto, ON)
• Changeover type for Heat Pump (HP) systems
• On-screen setup of HVAC type, Fan type
• F/C mode, and sensor calibration
Compatible with 24 VAC gas, oil, or electric heating and air conditioning systems;
or gas millivolt heating systems DO NOT USE ON 120VAC SYSTEMS!
Standard Systems
• 1 Stage Heating and Cooling
• 2 Stage Heating and Cooling
Heat Pump Systems
• 1 Stage Heating and Cooling
• 2 Stage Heating and Cooling
• 2nd or 3rd Stage Aux Heating (Electric Heat Strips)
Installation Outline
• Step 1 Remove Existing Thermostat
• Step 2 Install TBZ500 Thermostat
• Step 3 Setup Thermostat to match System Type
• Step 4 Install into Z-Wave Network
Copyright © Ecolink Intelligent Technology
24-02-2021 18:55