Table of Contents
Advertisement
Section 2 — Control Panels
4-M/E Main Panel
Source
Selection (4)
M/E
1
M/E
2
M/E
3
PGM
PST
Macros
Machine Control
Subpanel
Subpanel
66
You can actually enter any combination of seconds, frames and fields. The
Kalypso system will do the conversion and display the result in seconds,
frame, field format.
Decimal values for other non-time parameters are also input on the Master
E-MEM subpanel with the numeric keys, the
and the
button to complete the entry. If a default value exists for an
Enter
entry, it can be input without typing in a value by pressing:
,
•
Enter
The Kalypso Menu Panel also provides a touch activated keypad for
entering values directly into menus, using similar procedures.
The 4-M/E Kalypso Main panel is designed for large scale live produc-
tions. Sources are selected in the four M/Es on the left side of the panel
(M/E 1, 2, 3, and PGM PST). Transition, keying, and individual E-MEM
control selections are made on the middle right. Delegated controls for
various M/E modifiers are at the upper right. Master E-MEM and Trans-
form controls reside on the lower right. Additional specialized control sub-
panels are available between M/E 3 and the PGM PST buses
Figure 47. 4-M/E Main Panel and Subpanels
M/E Source Name
M/E Keyer
Displays (3)
Delegation (4)
(option)
Preview
Subpanel
Display (standard)
M/E Status
Displays (4)
Subpanels (3)
PGM/PST
Effects Edit
Source Name
Subpanel
Undo/•
button for the decimal,
(Figure
E-MEM
Transition
M/E Modifiers
Subpanels (4)
Transform
Master E-MEM
Subpanel
Subpanel
Kalypso — Reference Manual
47).
Subpanel
Effects Run
Subpanel
Advertisement
Table of Contents
