2-M/E Main Panel; Source Selection - THOMSON Grass Valley Kalypso Classic Reference Manual

2-M/E Main Panel

Local Aux
Subpanel
Source Name
Displays (3)
M/E
PGM
PST
Machine Control
Subpanel

Source Selection

Kalypso — Reference Manual
The 2-M/E Main panel is similar to the 4-M/E panel
3 M/Es and a PGM PST, the 2-M/E Main panel has one M/E bank and one
PGM PST bank, though three M/Es and PGM PST are accessible via dele-
gation. Local Aux Bus control capabilities are also built in as a subpanel.
Figure 81. 2-M/E Main Panel and Subpanels
Aux Bus M/E Status
Status Display Displays (2)
Preview
M/E Keyer
Subpanel
Delegation (2)
The controls on the 2-M/E Main subpanel are essentially identical to those
on a 4-M/E panel, though they may be placed at different locations on the
panel. Only differences in these controls will be discussed here. Refer to the
4-M/E subpanel descriptions for more information.
The 2-M/E Main panel has 24 source selection columns (with source name
displays), instead of the 32 columns on the 4-M/E Main panel. The
special function button is located in the M/E bank, and the
Keyer Copy
button is located in the PGM PST bank. The
Src Copy
not present, but is not needed because the Local Aux panel is incorporated
into the Main panel.
Bank Delegation
----- M/E Modifiers -----
Subpanel
Keyers, Masks
Macros Subpanels
Subpanel
Transition
Subpanels (2)
E-MEM Effects Edit
Subpanel Subpanel
2-M/E Main Panel
(Figure 81). Instead of
Mattes,
Copy/Swap
Subpanels
Effects Run
Master E-MEM
Subpanel
Subpanel
Transform
Subpanel
button is
Router Assign
143