Table of Contents
Advertisement
Section 3 — Menus
EIC Login Menu
196
The EIC Login menu is used to log in as the Engineering In Charge (EIC).
The menu is accessed via
depending on whether Single Suite mode or Multi Suite mode is active.
Figure 126
illustrates this menu in Single Suite mode.
Figure 126. EIC Login Menu, Single Suite Mode
A password may be required to log in, depending on the security account
settings. When logged in, changes can be made to the Kalypso system Engi-
neering Setups and loading an Eng Setup file will be permitted.
1. Use the soft knob or touch the Login Time data pad and enter a time
duration for the EIC session. If no time is entered a default time of 60
minutes will be used.
2. Touch the Login button.
a. If password security has not been activated you are immediately
logged in and can modify the Eng Setups parameters for the
specified time.
b. If password security is active, a popup keypad appears into which
you can enter the password. After the correct password is entered
you will be logged in and can make changes for the specified time.
After logging in, an
EIC login active - changes allowed
you access an Eng Setup menu.
,
. This menu is different,
Daily Setups
EIC Login
Kalypso — Reference Manual
message appears when
Advertisement
Table of Contents
