Automatic Stop; First Use; Hot Air Frying - TECHWOOD TFR-301SH Instruction Manual

This brand-new fryer design is an easy and healthy way to prepare your favourite
dishes. By using the hot air circulation and a grill, it is possible to make many
different dishes.
The special feature of this new fryer is to distribute the heat in all directions, so
most ingredients heat up everywhere and do not need oil.
The unit is equipped with a built-in timer, it automatically turns off the device when
countdown reaches zero. The unit can be manually turned off by turning the timer
knob, counter clockwise, to zero.
Before first use, remove the device and all accessories from the packaging.
• Clean the apparatus according to the instructions in "CLEANING AND
MAINTENANCE " paragraph.
• Place the machine on a suitable flat, stable surface.
Notes: It is not appropriate to fill the tank with oil or frying fat as the unit works with
hot air.
Never put anything on the device. This would disrupt the airflow and affect the
result of frying in hot air.
1. Plug the power plug into a grounded wall outlet.
2. To preheat the fryer, turn the timer knob for 5 minutes.
Notes: The heat indicator lights up.
The timer starts counting down the programmed cooking time.
During the process of frying with hot air, the heating indicator lights up
and goes out from time to time. This indicates that the thermostat is
working to maintain the preset temperature.
3. When the fryer is hot and ready to use, program the required cooking time.
Notes: See the 'Settings' section in this chapter to determine the correct
temperature and the required preparation time according to the
ingredients.
Always take the basket out of the fryer using the basket handle.
4. Place the ingredients in the basket.
Note: Never exceed the MAX indication as this may affect the quality of
the food.
5. Insert the drawer into the fryer.
6. Some ingredients should be shaken halfway through cooking.
INTRODUCTION

AUTOMATIC STOP

FIRST USE

HOT AIR FRYING

8