Acer Altos RM900 Installation Manual page 21

The Acer Altos 1100 server occupies 6U. Count the U positions and
hole numbers from the bottom up. Secure the mounting bracket on
st rd
the 1 and the 3 holes of the 1
that both of the mounting brackets are at the same level.
Take note of the vertical rail hole pattern. For
more information on the vertical rail hole pattern
and spacing, see section 2.4.
7.3.2 Installing the Component Rails
The component rails align the system housing to the mounting rail.
For more information about the mounting rail, please refer to section
7.3.1.
1. Attach the handle to the drawer using two M5 screws. See the
figure below.
Figure 18 Attaching the Handle to the Drawer
st
U using two M5 screws. Make sure
21