Observe and comply with the technical data. Information marked with this symbol indicates that the To use the device for its intended use, only use accessories and operating manual must be observed. spare parts which have been approved by Trotec. layer thickness measuring device BB20...
(for coatings on non-ferromagnetic Personnel qualifications surfaces). People who use this device must: The BB20 is a compact and versatile device suitable for quick, • have read and understood the operating manual, especially precise and non-destructive measurements of coating the Safety chapter.
Page 4
152 g Parameter Value Scope of delivery Model BB20 • 1 x Layer thickness measuring device BB20 Sensor • 2 x 1.5 V batteries AAA Functional principle Magnetic induction Turbulent flow • 1 x Transport case Measuring range 0 to 1250 μm 0 to 1250 μm...
Press the (3) or button (8) to select the desired menu item. In order to confirm the selected menu item, press the Red button (9) again. Press the Blue button (2) to return to the previous menu item. layer thickness measuring device BB20...
Page 6
The device automatically switches back on. be saved. Measurements can be carried out as usual. Background illumination In the menu, you can control the background illumination using Options and Backlight, during a measurement, use the Blue button (2). layer thickness measuring device BB20...
Page 7
Hence it is important to handle the supplied calibration accessories with care to avoid scratches and dirt on their respective surface as far as possible. layer thickness measuring device BB20...
Page 8
ð The layer thickness can be read from the display. 8. Now carry out the measurement on a coated sample. 9. Press the Zero button (4) to adopt the current calibration. 10. To exit the current calibration, press the Blue button (2). layer thickness measuring device BB20...
Page 9
Low limit section. Each measured value beyond the fixed tolerance limit appears on the display as follows: H: Measured value is above upper limit value. L: Measured value is below lower limit value. layer thickness measuring device BB20...
USB cable. times during production. If malfunctions occur nonetheless, check the device according to the following list. The software is available for download at www.trotec.de. The device does not switch on: Info •...
Directive 2006/66/EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators. Please dispose of batteries and accumulators according to the relevant legal requirements. layer thickness measuring device BB20...