J&M 1000 Operator's Manual page 7

9
21
22
Grain Cart Light Harness
1
Flow Control Spout/
Ground
2
6 Implement Lights
Tail/Running Lights
7
+12V Output
5 3
Min. 15A Fuse Look for these icons in your tractor
Right Turn & Hazards
Left Turn & Hazards
N/A
4
Rear Of Plug
Notes
The follow equipment will need the To activate the Flow Control Spout
+12V Output to function properly. Light, turn on your clearance or
• Lock-N-Load Flighting Protection implement lights and fully extend
• Scale Equipment auger to the unloading position.
• Electric Roll Tarp Charging System Please refer to your tractors operators
manual for speci c instructions.
Hydraulic Hoses
Flow Control Spout Auger Fold/Unfold Gate
RED YELLOW GREEN
Warning:
Hydraulic system parts and connections can contain high pressures which, if
suddenly and unexpectedly released, can cause serious injury or death.
Hydraulic Requirements:
• 9 - 12 GPM
• Auto Gate (if equipped): Set Gate to continuously close. Refer to your tractors
operators manual for speci c instructions.
GC JM0041058
23
24
8
19
20
23
10
Description
19 1000 Opposite Auger Side Stripe Kit
20 1000 Auger Side Stripe Kit
21 Grain Storm Decal
22 Check PTO Overlap Decal
23 Danger, Rotating Driveline Decal
24 Grain Cart Light Harness Decal (Standard Fold Carts)
Decals
12
CHECK ALL WHEEL NUTS
DEALER OR MANUFACTURER IS NOT
RESPONSIBLE FOR DAMAGE CAUSED BY
LOOSE WHEEL NUTS.
Part No.
JM0025951
JM0025949
JM0025930
JM0025435
JM0018036
JM0041058
2
1
7