Pen Pressure Testing; Calibration - Huion KAMVAS 13 User Manual

Kamvas 13

3.6 Pen Pressure Testing

You can gradually apply pressure to the stylus on the screen to test the pressure
level. Click "Clear" button to clear all the ink.

3.7 Calibration

Screen Calibration: Click the red point of the cross center appearing on the screen
to complete the calibration.
Restore Factory Settings: Click "Restore Default" to restore to the factory settings.
Cancel Calibration: Click"Cancel calibration" or press ESC on the keyboard to
cancel the calibration.
15 / 18
www.huion.com