Advertisement
L39"Albatros" 90mm edf
Place the wing and place fairing and place fairing supports form 6x6 balsa and sand to shape to take
the 1,5mm sheet, fill the front fairing with balsa scrap and sand to shape.
Place canopy back from F23 and F24 and 2x12 strip sheet place intake lips and sand to shape.
Place wing to fuselage, place horizontal stabilizer and line out with wing when satisfied glue, place
fairing from scrap
Place Vertical stabilizer and servo wire, pre sand the fairings.
Pagina 27
Advertisement
