Advertisement
L39"Albatros" 90mm edf
Fuselage:
Take out all parts and clean up the small tabs on the parts.
Make the front retract parts , join the retract 12x3 ply with glass and white glue or epoxy, step by step
join front retract strip 3x12 with some glass between them
Place all formers as per drawing in the sequence as shown Note that F13 is in 1 piece no need for
joining, we have basically a front part a mid-part and a back part of the fuselage, and front part
formers are placed
Pagina 17
Advertisement
