USB 2.0 Header
(9-pin USB2_7_8)
(see p.8, No. 2)
USB 3.2 Gen1 Header
(19-pin USB3_5_6)
(see p.8, No. 3)
Front Panel Audio Header
(9-pin HD_AUDIO1)
(see p.8 No. 28)
High Definition Audio supports Jack Sensing, but the panel wire on
the chassis must support HDA to function correctly. Please follow the
instruction in our manual and chassis manual to install your system.
SPDIF Header
(3-pin SPDIF1)
(see p.8, No. 29)
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
IntA_P_D+
IntA_P_D-
GND
IntA_P_SSTX+
IntA_P_SSTX-
GND
IntA_P_SSRX+
IntA_P_SSRX-
Vbus
1
Vbus
IntA_P_SSRX-
N/A
N/A
IntA_P_SSRX+
GND
IntA_P_SSTX-
N/A
IntA_P_SSTX+
N/A
GND
IntA_P_D-
IntA_P_D+
ID
18
There is one header on this
motherboard.
There is one header on this
motherboard.
This is an interface for front
panel audio cable that allows
convenient connection and
control of audio devices.
SPDIF header, providing
SPDIF audio output to HDMI
VGA card, allows the system to
connect HDMI Digital TV/
projector/LCD devices. Please
connect the SPDIF
connector of HDMI VGA card to
this header.