Fuses - Hyundai BC3 Owner's Manual

Maintenance

FUSES

Blade type Blade type
Normal Normal
Cartridge type Cartridge type
Normal Normal
Multi fuse Multi fuse
Normal Normal
A vehicle's electrical system is protected
from electrical overload damage by
fuses.
This vehicle has 2 (or 3) fuse panels, one
located in the driver's side panel bolster,
the other in the engine compartment.
If any of your vehicle's lights,
accessories, or controls do not work,
check the appropriate circuit fuse. If a
fuse has blown, the element inside the
fuse will be melted or broken.
9-52
If the electrical system does not work,
first check the driver's side fuse panel.
Before replacing a blown fuse, turn the
engine and all switches off, and then
disconnect the negative battery cable.
Always replace a blown fuse with one of
Blown Blown
the same rating.
If the replacement fuse blows, this
indicates an electrical problem.
Avoid using the system involved and
we recommend that all inspect an
authorized HYUNDAI dealer.
Blown Blown
Three kinds of fuses are used: blade type
for lower amperage rating, cartridge
type, and multi fuse for higher amperage
ratings.
Blown Blown
OTA070039 OTA070039
NEVER replace a fuse with anything but
another fuse of the same rating.
• A higher capacity fuse could cause
• Do not install a wire or aluminum
NOTICE
Do not use a screwdriver or any other
metal object to remove fuses because
it may cause a short circuit and damage
the system.
Information
i
WARNING
damage and possibly cause a fire.
foil instead of the proper fuse -
even as a temporary repair. It may
cause extensive wiring damage and
possibly a fire.