Hyundai BC3 Owner's Manual page 244

RADIO
Turning on the radio
1. On the control panel, press the
[AUDIO] button.
2. When the mode selection window
displays, turn the [TUNE] knob to
select the desired radio mode and
then press the knob.
FM/AM Mode
(1) Current radio mode
(2) Radio station information
(3) Preset list
Press the [MENU/CLOCK] button on the
control panel to access the following
menu options:
• Autostore: Save radio stations to the
preset list.
• Scan: The system searches for radio
stations with strong radio signals and
plays each radio station for about five
seconds.
• Sound settings: You can change
the settings related to sounds, such
as location where sound will be
concentrated and the output level for
each range.
- Balance: Select a location where
sound will be concentrated in the
vehicle. Select Balance, turn the
[TUNE] knob to select the desired
position, and then press the knob.
To set sound to be centerd in the
vehicle, select Centre.
- Equaliser: Adjust the output level for
each sound tone mode.
- Speed dependent vol.: Set the
volume to be adjusted automatically
according to your driving speed.
NOTICE
• Depending on vehicle models or
specifications, available options may
vary.
• Depending on the system or
amplifier specifications applied to
your vehicle, available options may
vary.
• Mode popup: Set to display mode
selection window when the [AUDIO]
button is pressed on the control panel.
• Date/Time: You can change the
date and time that are shown on the
system display.
- Set date: Set date to display on the
system display.
- Set time: Set time to display on the
system display.
- Time format: Select to display time
in the 12 hour format or the 24 hour
format.
- Display (Power Off): Set to display
the clock when the system power
is off.
• Language: You can change the display
language.
05
5-109