High Beam Assist (Hba); Function Setting; Operating Condition - Hyundai BC3 Owner's Manual

HIGH BEAM ASSIST (HBA) (IF EQUIPPED)
High Beam Assist is a system that
automatically adjusts the headlight
range (switches between high beam and
low beam) according to the brightness
of other vehicles and road conditions.
Detecting sensor (Front view
camera)
[1] : Front view camera
The front view camera is used as a
detecting sensor to detect ambient light
and brightness while driving.
Refer to the picture above for the
detailed location of the detecting sensor.
NOTICE
good condition to maintain optimal
performance of High Beam Assist.
For more details on the precautions
of the front view camera, refer to
"Forward Collision-Avoidance Assist
(FCA)" section in chapter 7.

Function setting

The driver can activate HBA by placing
the ignition switch to the ON position
and by selecting: 'User Settings
Lights
disable this setting, HBA will not work.
The setting of HBA will be maintained, as
selected, when the engine is re-started.

Operating condition

OPDE046057 OPDE046057
1. Place the light switch in the AUTO
position.
2. Turn on the high beam by pushing the
lever away from you.
3. High Beam Assist (
illuminate.
4. High Beam Assist will turn on when
vehicle speed is above 40 km/h (25
mph).
OBC3070001 OBC3070001
HBA (High Beam Assist)'. If you
) indicator will
05
5-49