Using The Flexology™ Wand; Flexology Storage; Using Smart Response™ Technology; Choosing A Surface Setting - Shark DuoClean IF200EU Instructions Manual

USING THE
FLEXOLOGY™ WAND
WARNING: This
vacuum does not stand
up on its own. Using
the unit when it lacks
stability may result
in personal injury. To
place in Flexology
Storage mode, press the
Flexology Wand button
and gently fold the
handheld vacuum down
toward the floor nozzle.
TIP: The carry handle
located below the
handheld vacuum can also
be used to assist in taking
the vacuum in and out of
Flexology Storage mode.
NOTE: Before vacuuming
your delicate rugs or carpet,
refer to the rug manufacturer's
recommended cleaning
instructions.
WHAT DOES THE
1
To start vacuuming, press the Power button, then recline
BRUSHROLL INDICATOR
the wand to start the brushrolls.
LIGHT MEAN?
USING THE FLEXOLOGY WAND
Solid Green
To easily access hard-to-reach areas under furniture without
The brushrolls are on and
having to bend down, press the Flexology Wand button to
working as they should.
position the wand to a lower angle.
Solid Red

FLEXOLOGY STORAGE

There is a jam in the brushroll
area. Turn your vacuum off
1
Press the Flexology Wand Lock Release button and gently
and remove the blockage.
fold the handheld vacuum forward toward the floor nozzle
until it locks in storage mode. Use the handle to carry the
No Light
vacuum to its storage location.
The brushrolls are off
because the vacuum is off,
To take the vacuum out of storage mode, press the Flexology
or the nozzle is not correctly
Wand Lock Release button while lifting up the handheld
connected to the wand or
vacuum. When straightened, the wand will lock in place.
handheld vacuum.
53
USAGE
STORAGE
USING SMART RESPONSE™
TECHNOLOGY
SMART RESPONSE TECHNOLOGY
The Smart Response Technology lets you select the ideal power setting and brushroll speed for
each cleaning job.

CHOOSING A SURFACE SETTING

Carpet setting – For cleaning thick
pile carpets. Both brushrolls spin faster,
working together to pick up debris below
the surface of your carpets.
Floor setting – For cleaning hard floors
and short pile carpets. The brushroll and
the Soft Roller both spin together slowly
to gently clean hard floors and short pile
carpets. The Soft Roller traps fine dust and
large particles, while the brushroll directs
that debris to the suction channel.
CHOOSING A SUCTION SETTING
There are 2 suction settings:
EXTENDED RUNTIME – For everyday
cleaning.
MAX POWER – Maximum power for
heavy-duty cleaning. (The MAX POWER
setting drains the Lithium ION Power
Pack Batteries faster than EXTENDED
RUNTIME setting.)
s h a r kc l e a n . e u 54