Sony XBR-55X900H Service Manual page 92

2020/06/27 06:31:32 (GMT+09:00)
CUC data transfer (OLED only)
1. In "Panel/PQ" service mode
a. Go to
b. To select
c. To change data , press "←" or "→" on remote commander.
SECTION 1
S E R V I C E A D J U S T M E N T
"WB/Mura/CUC data transfer"
"WB/Mura/CUC data
SECTION 2
S E C T I O N 4
Please apply Main board or panel is replaced.
category by "↑" or "↓".
transfer", press → button.
2. In "WB/Mura/CUC data transfer"
"CUC data
a.Select
remote commander .
b.To change the items, press "←" or "→" on remote
commander and press "Enter" button.
Choose
▪ 1. T-con to SoC
and press "Enter" button.
c."Mura data transfer" is also displayed on the menu,
but Mura function does not work on OLED model.
Please skip this item by pressing "↓" on remote
commander .
d.Select "[start]" and press "Enter" button to start
transfer.
SECTION 3 SECTION 4
transfer" by pressing "↑" or "↓" on
SECTION 5 SECTION 6
92
SYS SET