Sony XBR-55X900H Service Manual page 91

2020/06/27 06:31:32 (GMT+09:00)
WB data transfer (OLED only)
1. In "Panel/PQ" service mode
a. Go to
b. To select
c. To change data , press "←" or "→" on remote commander.
SECTION 1
S E R V I C E A D J U S T M E N T
"WB/Mura/CUC data transfer"
"WB/Mura/CUC data
SECTION 2
S E C T I O N 4
Please apply Main board or panel is replaced.
category by "↑" or "↓".
transfer", press → button.
2. In "WB/Mura/CUC data transfer"
a. Select "WB/Gamma data
remote commander .
b. To change the items, press "←" or "→" on remote commander
and press "Enter" button.
Selectable items are:
▪ 0. SoC to T-con
▪ 1. T-con to SoC
▪ 2. No action
c. "Mura data transfer" is also displayed on the menu, but Mura
function does not work on
CUC function can work. (refer to next page).
Please skip these items by pressing "↓" on remote
commander .
d. Select "[start]" and press "Enter" button to start transfer.
SECTION 3 SECTION 4
transfer" by pressing "↑" or "↓" on
OLED model.
SECTION 5 SECTION 6
91
SYS SET