Sony FW-43BZ35F Installation Manual

SONY BRAVIA PROFESSIONAL
ANDROID SIGNAGE DISPLAY
INSTALLATION MANUAL
1 INSTALLATION INSTRUCTIONS
1.1 Models covered by instruction
FW-43BZ35F
FW-49BZ35F
FW-55BZ35F
FW-65BZ35F
FW-85BZ40H
FW-75BZ40H
FW-65BZ40H
FW-55BZ40H
1.2 Ethernet connection
Use the LAN port to connect the TV to your network.
1.3 How to do a "Factory Reset"
Note: If the TV has not been set up before, the TV will power on in the" Install menu",
shown below. The factory reset can then be skipped.
Alternative 1:
From home menu open settings in the top right corner of the screen.
•
Storage & reset – Factory reset data
•
Erase everything
o
TV will now reboot
o
Do a normal installation of the screen
•
Alternative 2:
Unplug the TV AC power cord from the electrical socket.
•
Simultaneously press and hold down the Power and volume Down buttons on
•
the TV (not on the remote), and then (while holding the buttons down) plug
the AC power cord back in. Continue to hold the buttons down until the green
LED light appears.
It will take approximately 10-30 seconds for the LED light to turn green.
•
Release the buttons after the green LED light appears.
•