Sony XBR-55X900H Service Manual page 90

2020/06/27 06:31:32 (GMT+09:00)
WB/Mura/CUC data transfer (LCD Model only)
In "Panel/PQ" service mode
1.
a. Go to
b. To select
To change data , press "←" or "→" on remote commander.
c.
Service Mode
Model Information
Self diagnosis History
Video / Audio
Panel / PQ
General Setting
Tuner
Wi-Fi / BT
SDB Service Menu
[</>] Set [Home]Exit
SECTION 1
S E R V I C E A D J U S T M E N T
"WB/Mura/CUC data transfer"
"WB/Mura/CUC data
Panel / PQ
Back
WB Adjustment
WB/Mura/CUC data
transfer
>>
>>
>>
>>
>>
>>
>>
>>
SECTION 2
S E C T I O N 4
Please apply Main board or panel is replaced.
category by "↑" or "↓".
transfer", press → button.
<<
>>
>>
2. In "WB/Mura/CUC data transfer"
a. Select
[</>] Set [Home]Exit
b. To change the items, press "←" or "→" on remote
c. Similarly, to select the items in Mura and CUC
d. Select "[start]" and press "Enter" button to start
SECTION 3 SECTION 4
Back
Back
WB / Gamma data transfer
Mura data transfer
Mura data transfer
CUC data transfer
CUC data transfer
Start
"WB/Gamma data
"↑" or "↓" on remote commander .
commander and press "Enter" button.
Selectable items are:
▪ 0. SoC to T-con
(Only T-con is replaced)
▪ 1. T-con to SoC
(Main board or Panel is
replaced)
▪ 2. Not action
data.
transfer.
SECTION 5
<<
<<
<[ 0.Soc to T-con ]>
<[ 0.Soc to T-con ]>
<[ 0.Soc to T-con ]>
<[ 0.Soc to T-con ]>
<[ 0.Soc to T-con ]>
<[ 0.Soc to T-con ]>
[</>] Set [Home]Exit
[</>] Set [Home]Exit
transfer" by pressing
SECTION 6
SYS SET
90