Pre-Operation Inspection - BACKSAFE STURGO STD-181 Operating Instructions & Parts Manual

Operating Instructions & Parts Manual
Lifting Hazard
Use proper lifting techniques to load or tip the machine, or move the machine on stairs.
Do not move the machine on stairs when the machine is equipped with the 4 point caster option.

Pre-operation Inspection

Do Not Operate Unless:
You learn and practice the principles of safe machine operation contained in this operator's manual.
1. Avoid hazardous situations.
2. Always perform a pre-operation inspection.
Know and understand the pre-operation inspection before going on to the next section.
3. Always perform function tests prior to use
4. Inspect the workplace.
5. Only use the machine as it was intended
Fundamentals
The Pre-operation Inspection is a visual inspection performed by the operator prior to each work shift.
This inspection is designed to discover if anything is apparently wrong with a machine before the
operator test it.
Inspect the machine for modifications, damage or loose or missing parts.
A damaged or modified machine must never be used. If damage or any variation from factory delivered
condition is discovered, the machine must be tagged and removed from service.
Repairs to the machine may only be made by a qualified service technician, according to the
manufacturer's specifications. After repairs are completed, the operator must perform a per-operation
inspection again before testing the machine functions.
Be sure that the operator's manual is complete, legible and available for reference.
Be sure that all decals are legible and in place.
Check the following components or areas for damage, modifications and improperly installed or missing
parts:

Winch and related components

Base components

Legs

Roller wheels

Inner and outer frames

Glide buttons

Carriage hold-down assembly

Cable anchor

Cable and pulleys

Wheels and casters

Forks
Page 7 / 27
Ver. 2011-12-1