Set Up - iFootage Shark Slider Nano Instruction Manual

SET UP

Quick start
1. Press and hold the On/Off switch for several seconds, level the slider and await
the'dynamic calibration process' to indicate 100%, then enter the home page.
2. Press the On/Off switch and Fn gesture control button at same time, to initiate the
quick start mode.
3. Press the Fn gesture control button to set key frame point A and point B.
4. Press the button a second time and the carriage will return to zero point to start its
run.
Press and hold for several
seconds, await the
'dynamic calibration
process' to indicate 100 %,
enter the home screen.
Press to confirm carriage
location and press again to
start run.
For more information on functions please download the iFootage Moco App or
visit the website: www.ifootagegear.com for access to the software user manual.
– 34 –
-12 -
Press both buttons at
the same time for key
frame mode.
Press to set key frames.