Set Up - iFootage Shark Slider Nano Instruction Manual

SET UP

Quick start
1. Press and hold the On/Off switch for several seconds, level the slider and await the'dynamic
calibration process' to indicate 100%, then enter the home page.
2. Press the On/Off switch and Fn gesture control button at same time, to initiate the quick
start mode.
3. Press the Fn gesture control button to set key frame point A and point B.
4. Press the button a second time and the carriage will return to zero point to start its run.
Press and hold for several
seconds,await the 'dynamic
calibration process' to indicate
100%,enter the home page.
Press to to confirm carriage
location and press again to
*For more information on functions please download the iFootage Moco
App or visit the website: www.ifootagegear.com for access to the software
user manual.
start run.
- 10-
8
Press both buttons at the
same time for key frame
mode.
Press to set key frames.